Basic Scanning Operations

Powering On the Scanner:
Connect the scanner to the Type-C cable, ensuring the connectors are securely in place. Then, plug the Type-C cable into the computer, and the scanner will automatically power on. If the Type-C cable is unplugged from the PC or the scanner, the scanner will turn off.

Scanner Connection Status:
When powered on, the scanner's indicator light will be green. Once the scanner has successfully connected to the computer, the indicator light will turn blue. If the connection fails, the light will blink blue.
Starting and Stopping Scans:
Open the software, create a case, and enter the scanning program. Lift the scanner from the base, and it will enter preview mode. Press the button to switch to scanning mode, and the ring light will turn green. Press the button again to exit scanning mode and return to preview mode. After scanning is complete, place the scanner back on the base to enter sleep mode.
Scanner Control Function:
In both preview and scanning modes, press and hold the button to enter handle control mode. This allows you to switch between steps and modes. Please refer to the handle remote control for more details.